This project is focused on showcasing M2M Circuit’s innovative 4G/LTE Modem by displaying its capabilities of high and low throughput. We will demonstrate those capabilities by remotely flying a hexacopter through the 4G network that will stream command and control data, video data, and communicate through SMS. We have designed a drone that will use an onboard Maker Modem connected to a Beaglebone Black and Tl msp430 to process the data and communicate it through the 4G network. The system will use 4G/LTE network to connect the drone to the remote controller. The drone will transmit video from its on board camera to a video screen visible by the user. The user will send command and control data signals over the LTE network that will tell the drone what maneuvers to perform. Video will be captured from the drone, and sent back to the controller over the 4G LTE network. The drone will also have access to SMS command inputs and outputs to allow us to send control data and receive diagnostic data from the drone.